Railroad products are available exclusively from CTC Inc.
Product thumbnail

Model E-1400 Backlit LCD detector

Railroad type, card rack unit with two V.35 connec...

The Model E-1400 monitors and processes signals from four loop / lead-in circuits, four check loop circuits, and four Vital inputs. These inputs can be programmed to control eight Vital outputs, four primary Vital outputs and four auxiliary Vital out...
Product thumbnail

Model P-1400 Backlit LCD Detector

Railroad type, retrofit unit for in-ground enclosu...

The P-1400 is an inductive loop processor developed to provide detection of railway equipment in small and large detection areas typically required for yard switch, interlocking, and moveable bridge occupancy detection.Switch protection can be configured to pr...
Product thumbnail

Model U-1400 Backlit LCD Detector

Railroad type, shelf-mount unit with 55-pin MS con...

The U-1400 is a standalone, shelf- or wall-mount inductive loop processor developed to provide detection of railway equipment and highway vehicles in both small and large detection areas typically required for yard switch, interlocking, moveable bridge occupan...
Product thumbnail

Model PLC Preformed Loop

For railway applications

The PLC preformed loop is a prefabricated loop | lead-in assembly with an integral check loop. Ideal for use in railway applications when connected to a detector with the check loop feature.Each component of the PLC (loop cable, lead-in cable, and splice enclo...
Product thumbnail

Model PLC-R Preformed Loop

For Railroad Crossing Applications

The PLC-R preformed loop is a heavy duty, direct burial prefabricated loop assembly with an integral check loop. Ideal for use in railway applications when connected to a detector with the check loop feature.Each component of the PLC-R (loop cable, lead-in cab...
Product thumbnail

Model 805 Harness

55-pin Amphenol Type Harness, 18" Mesh Sleeving, L...

For use with the Model U-1400.
Product thumbnail

Model RR-418 Four Conductor Cable #18 AWG

Applications: Loop Cable for PLH-R, PLC-R; Lead-in...

The RR-418 is a triple jacketed, four conductor lead-in cable for direct burial in gravel or other abrasive roadway bases. Also used in Reno A&E's PLH-R Preformed Loops. Buried beneath dirt or gravel, the model RR-416 triple jacket resists abrasion ca...
Product thumbnail

Preformed Loop Brackets

For use with the PLH, PLH-R, PLC, and PLC-R Preformed Loops
Product thumbnail

Preformed Loop Support "T"

Reno A&E's Preformed Loop Support "T" is designed to support a preformed loop above the rebar when pouing concrete.It is recommended that the loop is a minimum of 2" above the rebar.