product image

Model AVI-E Transit Signal Priority (TSP) Receiver & Transmitter System (Multiple Codes)

Automatic Vehicle Identification, Rack Mount for NEMA, 170/2070 or ATC Controller Cabinets

The Reno A&E AVI (Automatic Vehicle Identification) system provides hands-free access to transit signal priority systems, automatic gates, automatic doors, and parking systems. The transmitter is attached to the underside of the vehicle and connected to the vehicle’s electrical system. When power is applied, the transmitter emits a continuous coded signal. The transmitter is inductively coupled through standard roadway loops to a Reno A&E AVI receiver (AVI-E). When the receiver recognizes a valid code, the receiver provides a signal permitting vehicle priority or access. The AVI transmitter provides a low frequency coded signal, which is inductively coupled through an in-ground loop, ensuring reliable vehicle detection. 

 The Model AVI-E Automatic Vehicle Identification Receiver is a two channel, card rack mount unit and provides an output signal once the vehicle(s) has (have) been detected. The AVI-E uses two antenna loop coils (one per channel) installed in the road surface to receive the transmitter’s code. The transmitter must pass directly over the area defined by the receiver’s antenna loop coil(s) at a height not exceeding four (4) feet. Each receiver channel is programmed to identify all of 19,683 specific transmitter codes. The AVI-E also incorporates loop monitoring capability that continually checks the integrity of the antenna loop(s). 

A front panel mounted DB-9, RS-232 communication port is provided to allow the unit to receive data from and transmit data to an external source. The model designation indicates the output configuration.